Environmental Drilling Services

We drilled our first environmental project in 1989. Since then we have continually expanded
our knowledge, skills and equipment.

Type of Services

Auger drilling from 4” to 15”

Soil sampling- split spoon, continuous dry coring

Water sampling – grab water and hydropunch

Well installation – monitoring and extraction

Well abandonment – over drilling and pressure grouting

Angle drilling

Nested, cluster and multi-point wells

Remediation- injection, extraction, sparge & vapor points

Conductor casings

Monitor wells and vapor points

Remediation – injection

Rigs include Truck-mounted, limited access, all-terrain and Portable

Vapor Probes – hand auger and direct push

Groundwater Investigation – Wells Along Russian River – Sonoma County

Equipment Description

Truck-Mounted Auger Rig

CPier – Eureka – Homboldt County

Deeprock – DR10

Variable Overhead, High Torque Auger Rig – Can be used under power lines and canopies, inside buildings and at the edge of roads, or in full production mode- mast at 22’ high, if there are no overhead limitations

Auger Rig

High Torque – 10,000 Ft.-lb.

Mast hydraulically adjusts 13’ to 22’

Wire-line sampling

Mono Pump

8’ wide

23’ Long

11’ high mast down

Weight – 22,000 lb.

Limited Access Track Rigs

CME 75 – Santa Rosa

CME 75 High Torque Auger Rig

Industry premier heavy-duty environmental drilling rig.

Torque – 13,000 Ft.-lb

Augers up to 15”

Auto-hammer

In-hole-hammer

Mono-pump

5’ Continuous Dry Sampler System

8’ wide

26’ long

31.5’ high mast up, 11.3’ mast dn.

Sidewalk in Petaluma

Deprok – DR8K

Rubber track auger rig- variable height mast. Excellent inside bldg. under power-lines, under canopies and inside narrow spaces. Can take 10” augers to 100’

Auger Rig

Angle drilling

Torque – 7500 ft-.lb

Auto-hammer

Mono Pump

Powers Portable rig for remote use

5 ’-2” Wide

13’ Long

7 ’ 3” high (mast dn.)

Min. Ht. 8’-9” with SFA

Min. Ht. 9’-6” with HSA

Weight 10,3 00 lb.

All-Terrain Track Auger Rigs

Creek Bed – Mendocino County

Morooka Track – All-Terrain Drill Rig

If you can walk it we can drill it.
Very stable. Slopes up to 30 degrees. Excellent on muddy sites.
Portable drill rig can be powered up to 250’ from this rig.

Augers – up to 11”

Torque – 3,000 ft-lb

Rubber tracks – 20” wide

Cathead and 140# drop hammer

7’ wide

13’ Long

7 ’ high

Weight – 12,000 lb.

Remote Access – Portable – Auger Rig

Hillside Marin County

Portable Remote Access Auger Drill

Can be set up in remote locations – hillsides, under canopies, under bridges, in ditches, inside closets, in rooms, basements, etc.
Access to drill location can be through narrow door, through windows, over walls, down hillsides, etc.
Rig is hand carried to drill locations in components (mast, rotary head, base, cathead, controls, 140# drop hammer, samplers, rods, augers) and assembled over hole.
Two hydraulic hoses are extended from DR8K or Morooka rig to power Portable drilling rig. Maximum distance from power source – 250’

Augers up to 11”

Torque – 3,000 Ft.-lb.

Cathead and 140 lb .drop-hammer

Concrete coring

Rig can be bolted to concrete floor

Rig can be staked to hillside

Minimum passage width 24”.

Minimum work area 3’ X 6’

Minimum overhead 8’ with SFA & 9.5’ with HSA .